Counting embroidery, this problem does not apply to almost never.In most cases, the scheme for it originally lined by cells into squares 10x10, and canvas or cloth is marked similarly.In that case, if you need to move further on the canvas drawing free-form, you can use one of the following methods.

methods for light fabrics



most simple and affordable way to translate any drawing on a light fabric - to use tracing paper.The sheet (or several sheets) put the shiny side to the fat tissue is applied on top of paper or fabric with a pattern you want to copy, and carefully chop off all the layers together.After that, the soft stick or blunt pencil encircle all the lines, being careful to ensure that nothing is missed.Pressing the pen in most cases, requires very small.

can be used to transfer the pattern on the smooth light fabric special transferable pencil.In carefully selected pattern pin sheet of tracing paper and a special pencil encircle it.Then fasten the tracing paper with fabric pattern down and iron iron.Figure exposed to high temperatures printed on the fabric.Using this method, we must remember that some of the tissue temperature threshold is very low, in the case of translucent synthetic fabrics as well as natural silk, this method is not feasible.

for these delicate fabrics, there is another way to transfer the image.Figure put on the bottom surface with illumination (this may be a sheet of plexiglass, placed on two stools) and placed on top of the fabric pattern on which it is to be translated.This method is not only transparent fabrics, but also for a thin cotton, cambric, flax or even sheeting in some cases.

Methods for dark fabrics



For dark fabrics, a special tracing paper, and although find it more complicated than ordinary, to use it in the end is very convenient.

In the case of tracing paper in the public domain, or no need to transfer the pattern on the fabric such as velvet fuzzy on which drawing with tracing paper would not hold, there are several other ways.

first method - stitching.Figure copied on tracing paper, and then the contour of small stitches sewn to the fabric, using a contrasting thread.After the pattern is completely transferred, the paper simply terminated and filament loop remains on the fabric.You can then remove, and it can be disguised as embroidery.

Skolkov manufacturing method is suitable for absolutely all types of fabric and depending on the dye to any color.But it requires a lot of time spent, so this method is used when no other ways, namely when you want to move the picture on the fuzzy fabric.

first pattern is transferred to the tracing paper and then tracing awl to make holes in his path.You can pierce several layers of tracing paper so that the figures for the translated at hand, and can be used to make mica and eternal skolok.In any case, then tracing paper or mica is attached to the fabric and greased toothpaste top - for dark fabrics, toothpaste dye - for light.It is best to dilute the paste, and then use the advance for promazyvaniya Skolkov sponge.Toothpaste, penetrating into the holes on Skolkov, forms a durable cloth contour drawing, which will completely disappear after washing.