Almost all washing machines for household purposes, made with standard size.Typical linear dimensions important to know if the repair is in full swing, and filling appliances have not thought out.In any case, you should determine the type of washing machine: whether it will be built-in appliances, car class "mini" or a device with a vertical load.
Built-in appliances may have similar sizes, but is inspired faceplate.It is important to note that the machine is fit harmoniously into the interior as much as possible.

machines with front-loading


This standard class washing machines, which is required for the installation niche width of 60 centimeters.All machines are full size front-loading have a depth of 60 centimeters, which is why the machine does not always fit harmoniously into the set of kitchen: facade may not be flush with the front panel of the washing machine.All devices have a standard housing with a height of 85 centimeters.
Some washing machines the exact size of the width can be less than 3 - 10 mm.

Washing machines and dryers


For machines with vertical load of laundry clearance height is not specified, but is generally 85 centimeters, like front-loading units.In width, they come with a width of 40 and 45 centimeters. Some manufacturers can use intermediate widths housing, for example - 42 centimeters, but indicate the maximum size at which prepare the mounting location.

Depth of devices Standard: 60 centimeters.

Built-in appliances


width Embedded washing machines is the same as for devices with front-loading laundry: from 59 to 60 centimeters.The maximum size of the depth - 60 centimeters, the minimum - 33 centimeters.

If the size of the washing machine does not allow you to carry it through the doorway, you can remove the door hatch loading, thus reducing the depth of a few centimeters.

In principle, you can build any machine, but only available with built-in special decorative door.In addition, to be built with conventional machines is required to remove the cover to reduce the height of the unit, while the built-in machines have a vertical clearance in 81.8 - 85 cm.

Washers class "miniĀ»


Compact washing machines are reduced depth of the drum, and therefore have a smaller depth of the housing.The smallest version of the machine are at a depth of 33 centimeters, less compact - up to 45 centimeters.The width and height of these washing machines are standard.