What is the primer for wood

primer for wooden surfaces comes in liquid form, the composition should be applied with a brush, with a tree formed completely colorless coating.

most common and time-tested soils are brand "Belinka", "pinotex", "Aquatex" and "Tikkurila".The last part is only released on an oil basis, therefore after treatment it is necessary to use a surface finish, which also contains oil.

What is the primer for wood

primer penetrates into the wood 5-7 mm, depending on quality, and this allows to achieve high barrier properties.When applying the primer on the surface of the wood produced the film, which serves as an additional protection, and the link between the topcoat and the wood itself.

Since soil fills the wood pores and penetrates deep into them, the subsequent consumption of paints is significantly reduced.After the wood is no longer actively absorb impregnation.Experts proved that if the tree is pre-treated with alkyd primer consumption decorative and protective coating to decrease by 20-30%.And since the topcoat is an average of from 2.5 to 5000, and the soil can be purchased within the 1.5-2 thousand rubles, savings will be significant.

But saving supplies - is not the most important thing.The tree can destroy pests, and soil are special components that prevent this.Bark beetles and other insects do not like wood, treated in a similar composition.

timber may act destructively high humidity and temperature changes, the result is the appearance of blue and mold.Only soil treatment may prevent this phenomenon.The tree does not darken, do not rot, and will long serve.

As a result, use of a primer, the life of decorative and protective coating is extended by 5-7 years.This is especially true for wood that is on the outside and exposed to rain, pests, sunlight.After processing wood primer need for 3 months treated surface decorative coating.

Therefore all masters recommended to use primer for wood, because this measure can prevent a lot of problems, and significantly save money.